The angle valve is an angle globe valve. The angle valve is similar to the ball valve, and its structure and characteristics are modified from the ball valve. The difference with the ball valve is that the outlet of the angle valve is at a right angle of 90 degrees to the inlet. Angle valve is also called triangle valve, angle valve, angle water valve. This is because the pipe is in a 90-degree corner shape at the angle valve, so it is called an angle valve, an angle valve, and an angle valve.

Features of angle valve:

1. The flow path is simple, and the dead zone and eddy current zone are small. With the help of the scouring effect of the medium itself, it can effectively prevent the medium from clogging, that is, it has better self-cleaning performance;
2. The flow resistance is small, and the flow coefficient is larger than that of the single-seat valve, which is equivalent to the flow coefficient of the double-seat valve;
It is suitable for applications with high viscosity, suspended solids and granular fluids, or where right-angle piping is required. The flow direction is generally bottom in and side out. In special cases, it can be reversed, that is, the flow is side-in and bottom-out. There are two types of triangular valve, hot and cold (distinguished by blue and red marks). Most manufacturers have the same material. The cold and hot marks are mainly to distinguish which is hot water and which is cold water

The purpose of the angle valve:

1. Civil: The angle valve mainly has four functions: ① It is used to transfer the internal and external water outlets; ② The water pressure is too large, which can be adjusted on the triangle valve and closed a little; ③ The function of the switch, if the faucet leaks, etc. Turn off the triangular valve, you don’t have to close the main valve in the house; ④It is beautiful and elegant. Therefore, general new house decoration are essential plumbing accessories, so designers will also mention it when decorating a new house.
2. Industrial use: The valve body of the angle valve has three ports: the water inlet, the water volume control port, and the water outlet, so it is called a triangle valve. Of course, the angle valve is constantly improving. Although there are still three ports, there are also angle valves that are not angular. The angle valve that the industry refers to: the angle control valve is similar to the straight-through single-seat control valve except that the valve body is a right angle.