1. The cleaning of the floor drain usually involves disassembling the floor drain for cleaning. Before disassembling, the debris on the floor drain should be cleaned up to avoid the debris falling into the sewer and causing blockage. Then use a brush to clean the removed floor drain, and then install the floor drain after disinfecting and deodorizing the sewer.
2. The maintenance of the floor drain should pay attention to regularly cleaning the impurities near the floor drain to avoid the accumulation of impurities in the floor drain for a long time and cause congestion. Also, pay attention to regular cleaning to keep the floor drain unblocked. Because the floor drain is connected to the sewers, it is easy to breed bacteria, so the floor drain should also be disinfected regularly.

Floor drain cleaning method
1. Soda water to dredge: first pour half a cup of cooked soda powder into the sewer, and then pour half a cup of vinegar, the soda reacts with the acid in the vinegar to remove the oily substances adhering to the pipe.
2. Log dredging: first insert a log with a diameter close to the drainage outlet into the water pipe, put a certain amount of water in the pool, and quickly twitch the log up and down without interruption. Under the action of suction and pressure, the pipe The filth can also be washed away immediately.
3. Soda adhesion method: If the previous methods do not work, you can also use the soda adhesion method. First pour the soda powder into the sewer, then pour half a cup of edible vinegar, and after they react, they will be put into the pipeline. stains are washed away.
4. Floor drain anti-blocking film: As the saying goes, open source still needs to be throttled. It is better to prevent blockage than to wait until it is blocked and then scratch your head to find a way to prevent blockage. Now there is a floor drain anti-blocking film on the market. The holes are flowing down, and the dirt is all piled up on the anti-blocking film. When it feels dirty, take it off and throw it into the trash can. If you can’t buy it outside, it’s easy to make one with materials such as stockings.
5. Caustic soda: Use caustic soda, a relatively professional chemical ingredient sold in the market, to clear the stains, pour the caustic soda into the sewer pipe, mix it with boiling water, and the two will have a chemical reaction. In the sewer pipe due to the temperature Rising quickly, it can melt away some of the stains that are stuck and stuck in the sewer pipes. Rinse several times to remove dirt smoothly.
6. Pipe dredging agent: Pipe dredging agent is a better product for dredging sewage pipes at present: it is particularly effective for dredging hair, water solubility, paper scraps, etc. Basins, bidets, toilets, etc.